Table of Contents
EIP-2930 allows users to define addresses and storage slots for a transaction.
https://eips.ethereum.org/EIPS/eip-2930
Sphinx 1.X has automated the accessList for Shardeum RPC nodes to route shards. Therefore, you no longer need to specify the accessList for these networks with automated accessList generation.
This document is useful for:
-educational purposes
-situations where the automated accessList fails and you need to specific the accessList directly
The accessList transaction parameter is where the EIP-2930 address and storage slot data go.
Based on the EIP-2930 specification, the general syntax should be:
-the address [20 bytes]
-then the storage slots being accessed at that address [32 bytes]
Example:
[
[
"0xde0b295669a9fd93d5f28d9ec85e40f4cb697bae",
[
"0x0000000000000000000000000000000000000000000000000000000000000003",
"0x0000000000000000000000000000000000000000000000000000000000000007"
]
],
[
"0xbb9bc244d798123fde783fcc1c72d3bb8c189413",
[]
]
]Send an EIP-2930 transaction with an access list address that has no storage:
const Web3 = require('web3')
const ethers = require("ethers")
const rpcURL = "https://dapps.shardeum.org"
const web3 = new Web3(rpcURL)
const provider = new ethers.providers.JsonRpcProvider(rpcURL)
const signer = new ethers.Wallet(Buffer.from(process.env.devTestnetPrivateKey, 'hex'), provider);
console.log("User wallet address: " + signer.address)
const transferToWallet = new ethers.Wallet(Buffer.from(process.env.devTestnetPrivateKeyTwo, 'hex'), provider);
console.log("transferToWallet address: " + transferToWallet.address)
createAndSendTx();
async function createAndSendTx() {
const chainIdConnected = await web3.eth.getChainId();
console.log("chainIdConnected: "+ chainIdConnected)
const oneEtherInWeiSHM = "1000000000000000000"
console.log("oneEtherInWeiSHM: " + oneEtherInWeiSHM)
const userBalance = await provider.getBalance(signer.address);
console.log("User Balance [Shardeum SHM]" )
console.log(ethers.utils.formatEther(userBalance))
const receiverBalance = await provider.getBalance(transferToWallet.address);
console.log("Receiver Balance [Shardeum SHM]" )
console.log(ethers.utils.formatEther(receiverBalance))
const txCount = await provider.getTransactionCount(signer.address);
const tx = signer.sendTransaction({
chainId: chainIdConnected,
to: transferToWallet.address,
nonce: web3.utils.toHex(txCount),
gasLimit: web3.utils.toHex(300000), // Raise the gas limit to a much higher amount
gasPrice: web3.utils.toHex(web3.utils.toWei('30', 'gwei')),
value: oneEtherInWeiSHM,
type: 1,
accessList: [
{
address: transferToWallet.address,
storageKeys: []
}
]
});
console.log("WAIT FOR TX RECEIPT: ")
await tx
console.log("TX RECEIPT: ")
console.log(tx)
}from web3 import Web3
import json
import os
import time
ShardeumConnectionHTTPS = "https://dapps.shardeum.org/";
web3 = Web3(Web3.HTTPProvider(ShardeumConnectionHTTPS))
chainIdConnected = web3.eth.chain_id
print("chainIdConnected: " + str(chainIdConnected))
devTestnetPrivateKey = str(os.environ['devTestnetPrivateKey']);
userWallet = (web3.eth.account.from_key(devTestnetPrivateKey)).address
print("User Wallet Address: " + userWallet)
devTestnetPrivateKeyTwo = str(os.environ['devTestnetPrivateKeyTwo']);
transferToWallet = (web3.eth.account.from_key(devTestnetPrivateKeyTwo)).address
print("transferToWallet address: " + transferToWallet)
oneEtherInWeiSHM = "1000000000000000000"
print("weiMsgValueToSend: " + oneEtherInWeiSHM)
userBalance = web3.eth.getBalance(userWallet);
print("User Balance [Shardeum SHM]" )
print(web3.fromWei(userBalance, "ether"))
receiverBalance = web3.eth.getBalance(transferToWallet);
print("Receiver Balance [Shardeum SHM]" )
print(web3.fromWei(receiverBalance, "ether"))
transferTx = {
'chainId' : chainIdConnected,
'nonce': web3.eth.getTransactionCount(userWallet) ,
'to': transferToWallet, #WORKS WITH REGULAR WALLETS BUT CANNOT SEND TO CONTRACT FOR SOME REASON?
'gas': 2100000, #WORKS WITH 1000000. If not try : Remix > deploy and run transactions
'gasPrice': web3.toWei('30', 'gwei'), # https://etherscan.io/gastracker
'value': int(oneEtherInWeiSHM),
'accessList' :
[
{
"address" : transferToWallet,
"storageKeys": []
}
]
}
signed_tx = web3.eth.account.signTransaction(transferTx, devTestnetPrivateKey)
tx_hash = web3.toHex(web3.eth.sendRawTransaction(signed_tx.rawTransaction))
print("TX HASH: " + tx_hash)
time.sleep(15)
receipt = web3.eth.getTransactionReceipt(tx_hash)
print("TX RECEIPT: " + str(receipt) )// SPDX-License-Identifier: MIT
pragma solidity 0.8.17;
contract contractToCall {
uint public slot0; //uint is 32 bytes and fills a 32 byte slot. //Do not set 0 manually it wastes gas!
function set(uint x) public {
slot0 = x;
}
}
contract Multicall {
contractToCall public callContractToCall;
constructor(address setCallOne) {
callContractToCall = contractToCall(setCallOne);
}
function multiCallRead() public view returns(uint) {
return callContractToCall.slot0();
}
function multiCallWrite(uint x) public {
callContractToCall.set(x);
}
}Send an EIP-2930 transaction with a accessList. The accessList contains the contract’s address and accessed storage slot (or slots). In this case, it will be storage slot0, because it is a single uint storage variable (uint = 256 bits = 32 bytes) which is modified when we call “set(unit)”.
const Web3 = require('web3')
const ethers = require("ethers")
const rpcURL = "https://dapps.shardeum.org/"
const web3 = new Web3(rpcURL)
const provider = new ethers.providers.JsonRpcProvider(rpcURL)
const signer = new ethers.Wallet(Buffer.from(process.env.devTestnetPrivateKey, 'hex'), provider);
console.log("User wallet address: " + signer.address)
const simpleStorageAddress = '0xE8eb488bEe284ed5b9657D5fc928f90F40BC2d57'
const simpleStorageABI = [{"inputs":[{"internalType":"uint256","name":"x","type":"uint256"}],"name":"set","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"slot0","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"}]
const simpleStorageDeployed = new web3.eth.Contract(simpleStorageABI, simpleStorageAddress)
createAndSendTx();
async function createAndSendTx() {
const chainIdConnected = await web3.eth.getChainId();
console.log("chainIdConnected: "+ chainIdConnected)
const slot0 = await simpleStorageDeployed.methods.slot0().call()
console.log("slot0: "+ slot0)
const unixTime = Date.now();
console.log("UNIX TIME: " + unixTime)
const txCount = await provider.getTransactionCount(signer.address);
const tx = signer.sendTransaction({
chainId: chainIdConnected,
to: simpleStorageAddress,
nonce: web3.utils.toHex(txCount),
gasLimit: web3.utils.toHex(300000), // Raise the gas limit to a much higher amount
gasPrice: web3.utils.toHex(web3.utils.toWei('30', 'gwei')),
data: simpleStorageDeployed.methods.set(unixTime).encodeABI(),
type: 1,
accessList: [
{
address: simpleStorageAddress,
storageKeys: [
"0x0000000000000000000000000000000000000000000000000000000000000000",
]
}
]
});
console.log("WAIT FOR TX RECEIPT: ")
await tx
console.log("TX RECEIPT: ")
console.log(tx)
}from web3 import Web3
import json
import os
import math
import time
ShardeumConnectionHTTPS = "https://dapps.shardeum.org/";
web3 = Web3(Web3.HTTPProvider(ShardeumConnectionHTTPS))
chainIdConnected = web3.eth.chain_id
print("chainIdConnected: " + str(chainIdConnected))
devTestnetPrivateKey = str(os.environ['devTestnetPrivateKey']);
userWallet = (web3.eth.account.from_key(devTestnetPrivateKey)).address
print("User Wallet Address: " + userWallet)
Contract_At_Address= web3.toChecksumAddress("0xE8eb488bEe284ed5b9657D5fc928f90F40BC2d57");
abi_Contract = json.loads('[{"inputs":[{"internalType":"uint256","name":"x","type":"uint256"}],"name":"set","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"slot0","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"}]')
contract_Call = web3.eth.contract(address = Contract_At_Address , abi = abi_Contract);
print(contract_Call.functions.slot0().call());
unixTime = int(math.floor( time.time()*(10**3)) )
print("UNIX TIME: " + str(unixTime) )
EIP_2930_tx = {
'chainId' : chainIdConnected,
'nonce': web3.eth.getTransactionCount(userWallet) ,
'to': Contract_At_Address, #WORKS WITH REGULAR WALLETS BUT CANNOT SEND TO CONTRACT FOR SOME REASON?
'gas': 2100000, #WORKS WITH 1000000. If not try : Remix > deploy and run transactions
'gasPrice': web3.toWei('30', 'gwei'), # https://etherscan.io/gastracker
'data' : contract_Call.encodeABI(fn_name='set', args=[unixTime]) ,
'accessList' :
[
{
"address" : Contract_At_Address,
"storageKeys": [
"0x0000000000000000000000000000000000000000000000000000000000000000",
]
}
]
}
signed_tx = web3.eth.account.signTransaction(EIP_2930_tx, devTestnetPrivateKey)
tx_hash = web3.toHex(web3.eth.sendRawTransaction(signed_tx.rawTransaction))
print("TX HASH: " + tx_hash)
time.sleep(15)
receipt = web3.eth.getTransactionReceipt(tx_hash)
print("TX RECEIPT: " + str(receipt) )Reading contract states cross shard does not need an accessList.
For example, ERC-20 multicall:
tokenObject.totalSupply()will work with no accessList cross shard.
Writing contract states cross shard requires an accessList.
For example, ERC-20 multicall:
tokenObject.transfer(recipient, amount)will require an accessList to work cross shard.
Contract Multicall can change states in other contracts (in this case contractToCall). For sharded Shardeum networks (like Liberty 2.X and Sphinx), we need to specify the addresses and storage slots being called outside “from” and “to” in the transaction.
Sphinx (betanet) will not need the codeHash in storage slots for each corresponding externally called address.
In Solidity, you can get an address codeHash from a deployed contract on the matching network [along with checking if an address is a contract]. You can also get an address codeHash with the ethers library.
// SPDX-License-Identifier: MIT
pragma solidity 0.8.17;
contract addressCodeHash { //From https://soliditydeveloper.com/extcodehash
function getCodeHash(address account) public view returns (bytes32) {
bytes32 codeHash;
assembly { codeHash := extcodehash(account) }
return (codeHash);
}
function isContractBasedOnHash(address account) public view returns (bool) {
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
bytes32 codeHash;
assembly { codeHash := extcodehash(account) }
return (codeHash != accountHash && codeHash != 0x0);
}
function isContractBasedOnSize(address addr) public view returns (bool) {
uint size;
assembly { size := extcodesize(addr) }
return size > 0;
}
}const Web3 = require('web3')
const ethers = require("ethers")
const rpcURL = "https://dapps.shardeum.org/"
const web3 = new Web3(rpcURL)
const provider = new ethers.providers.JsonRpcProvider(rpcURL)
const signer = new ethers.Wallet(Buffer.from(process.env.devTestnetPrivateKey, 'hex'), provider);
console.log("User wallet address: " + signer.address)
const contractAddress_JS = '0xb1fEf690f84241738b188eF8b88e52B2cc59AbD2'
const contractABI_JS = [{"inputs":[{"internalType":"uint256","name":"x","type":"uint256"}],"name":"multiCallWrite","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"setCallOne","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[],"name":"callContractToCall","outputs":[{"internalType":"contractcontractToCall","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"multiCallRead","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"}]
const contractDefined_JS = new web3.eth.Contract(contractABI_JS, contractAddress_JS)
createAndSendTx();
async function createAndSendTx() {
const chainIdConnected = await web3.eth.getChainId();
console.log("chainIdConnected: "+ chainIdConnected)
const slot0 = await contractDefined_JS.methods.multiCallRead().call()
console.log("slot0: "+ slot0)
const contractOneAddress = await contractDefined_JS.methods.callContractToCall().call()
console.log("contractOneAddress: "+ contractOneAddress)
const codeHash = await provider.getCode(contractOneAddress)
console.log("contractOneAddress codeHash: " + codeHash)
const unixTime = Date.now();
console.log("UNIX TIME: " + unixTime)
const txCount = await provider.getTransactionCount(signer.address);
const tx = signer.sendTransaction({
chainId: chainIdConnected,
to: contractAddress_JS,
nonce: web3.utils.toHex(txCount),
gasLimit: web3.utils.toHex(2100000), // Raise the gas limit to a much higher amount
gasPrice: web3.utils.toHex(web3.utils.toWei('30', 'gwei')),
data: contractDefined_JS.methods.multiCallWrite(unixTime).encodeABI(),
type: 1,
accessList: [
{
address: contractOneAddress, //Contract address we are calling from the "to" contract at some point.
storageKeys: [
"0x0000000000000000000000000000000000000000000000000000000000000000",
codeHash, //Code hash from EXTCODEHASH https://blog.finxter.com/how-to-find-out-if-an-ethereum-address-is-a-contract/
]
}
]
});
console.log("WAIT FOR TX RECEIPT: ")
await tx
console.log("TX RECEIPT: ")
console.log(tx)
}from web3 import Web3
import json
import os
import time
import math
ShardeumConnectionHTTPS = "https://dapps.shardeum.org/";
web3 = Web3(Web3.HTTPProvider(ShardeumConnectionHTTPS))
chainIdConnected = web3.eth.chain_id
print("chainIdConnected: " + str(chainIdConnected))
devTestnetPrivateKey = str(os.environ['devTestnetPrivateKey']);
userWallet = (web3.eth.account.from_key(devTestnetPrivateKey)).address
print("User Wallet Address: " + userWallet)
multicallContractAddress= web3.toChecksumAddress("0xb1fEf690f84241738b188eF8b88e52B2cc59AbD2");
multicallContractABI = json.loads('[{"inputs":[{"internalType":"uint256","name":"x","type":"uint256"}],"name":"multiCallWrite","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"setCallOne","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[],"name":"callContractToCall","outputs":[{"internalType":"contractcontractToCall","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"multiCallRead","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"}]')
multicallContractDeployed = web3.eth.contract(address = multicallContractAddress , abi = multicallContractABI);
contractOneAddress = multicallContractDeployed.functions.callContractToCall().call()
print("contractOneAddress: "+contractOneAddress)
slot0 = multicallContractDeployed.functions.multiCallRead().call()
print("slot0: "+ str(slot0) )
codeHashBytes32 = (web3.eth.get_code(contractOneAddress))
codeHashString = codeHashBytes32.hex()
print("contractOneAddress codeHash: " + codeHashString )
unixTime = int(math.floor( time.time()*(10**3)) )
print("UNIX TIME: " + str(unixTime) )
EIP_2930_tx = {
'chainId' : chainIdConnected,
'to': multicallContractAddress, #WORKS WITH REGULAR WALLETS BUT CANNOT SEND TO CONTRACT FOR SOME REASON?
'nonce': web3.eth.getTransactionCount(userWallet) ,
'gas': 2100000, #WORKS WITH 1000000. If not try : Remix > deploy and run transactions
'gasPrice': web3.toWei('30', 'gwei'), # https://etherscan.io/gastracker
'data' : multicallContractDeployed.encodeABI(fn_name='multiCallWrite', args=[unixTime]) ,
'type' : 1,
'accessList' :
[
{
"address" : contractOneAddress,
"storageKeys": [
"0x0000000000000000000000000000000000000000000000000000000000000000",
codeHashString ##Code hash from EXTCODEHASH https://blog.finxter.com/how-to-find-out-if-an-ethereum-address-is-a-contract/
]
}
]
}
signed_tx = web3.eth.account.signTransaction(EIP_2930_tx, devTestnetPrivateKey)
tx_hash = web3.toHex(web3.eth.sendRawTransaction(signed_tx.rawTransaction))
print("TX HASH: " + tx_hash)
time.sleep(15)
receipt = web3.eth.getTransactionReceipt(tx_hash)
print("TX RECEIPT: " + str(receipt) )Tool generates accessList with 91% accuracy:
https://github.com/alexchenzl/predict-al
EIP-2930 accessList generation for swap transactions can be found in this GitHub repository:
https://github.com/shardeum-globalswap/interface/tree/support-eip2930
Solidity interfaces allow smart contracts to interact with each other.
Solidity interfaces can:
-call contracts with different Solidity versions
-use functions that are only needed for their use case
The contract interface is defined above the contract that will be calling the contract interface. Functions are then defined inside the interface based on name, inputs and modifiers.
A contract interface instance needs to be created in the contract that will be using the interface. The contract interface is then defined when its address is set inside the constructor for the contract using the interface.
One popular contract that is useful with interfaces is WETH (Wrapped Ether). This contract converts MSG.VALUE into an ERC-20 instance. On Shardeum, SHM Is MSG.VALUE. Therefore, WETH is WSHM on Shardeum. This contract has wrap and unwrap functions:
Deposit (Wrap): SHM => WSHM.
Withdraw (Unwrap): WSHM => SHM.
Using a WSHM interface, we can create a Solidity 0.8.0 contract which can interact with WSHM (Solidity 0.4.0).
// SPDX-License-Identifier: MIT
pragma solidity ^0.4.18;
contract WSHM {
string public name = "Wrapped SHM";
string public symbol = "WSHM";
uint8 public decimals = 18;
event Approval(address indexed src, address indexed guy, uint wad);
event Transfer(address indexed src, address indexed dst, uint wad);
event Deposit(address indexed dst, uint wad);
event Withdrawal(address indexed src, uint wad);
mapping (address => uint) public balanceOf;
mapping (address => mapping (address => uint)) public allowance;
function() public payable {
deposit();
}
function deposit() public payable {
balanceOf[msg.sender] += msg.value;
Deposit(msg.sender, msg.value);
}
function withdraw(uint wad) public {
require(balanceOf[msg.sender] >= wad);
balanceOf[msg.sender] -= wad;
msg.sender.transfer(wad);
Withdrawal(msg.sender, wad);
}
function totalSupply() public view returns (uint) {
return this.balance;
}
function approve(address guy, uint wad) public returns (bool) {
allowance[msg.sender][guy] = wad;
Approval(msg.sender, guy, wad);
return true;
}
function transfer(address dst, uint wad) public returns (bool) {
return transferFrom(msg.sender, dst, wad);
}
function transferFrom(address src, address dst, uint wad)
public
returns (bool)
{
require(balanceOf[src] >= wad);
if (src != msg.sender && allowance[src][msg.sender] != uint(-1)) {
require(allowance[src][msg.sender] >= wad);
allowance[src][msg.sender] -= wad;
}
balanceOf[src] -= wad;
balanceOf[dst] += wad;
Transfer(src, dst, wad);
return true;
}
}// SPDX-License-Identifier: MIT
pragma solidity 0.8.17;
interface interfaceWSHM {
function transfer(address dst, uint wad) external returns (bool);
function transferFrom(address src, address dst, uint wad) external returns (bool);
function withdraw(uint wad) external;
function deposit() external payable;
}
contract multicallWSHM {
interfaceWSHM public WSHM;
receive() external payable {}
fallback() external payable {}
constructor() {
WSHM = interfaceWSHM(0xa80d5d2C8Cc0d06fBC1F1A89A05d76f86082C20e); // WSHM address.
}
function multicallDeposit() public payable {
WSHM.deposit{value: msg.value}();
WSHM.transfer(msg.sender, msg.value);
}
function multicallWithdraw(uint256 amount) public {
WSHM.transferFrom(msg.sender,address(this),amount);
WSHM.withdraw(amount);
payable(msg.sender).transfer(address(this).balance);
}
}
Stay updated on major developments about Shardeum.
Thank you!
You can now develop your on-chain games near-instantly using LYNC SDKs and launch them on Shardeum for linear and infinite...
Shardeum, with its pioneering protocol, will achieve immediate finality and low latency through transaction level consensus & parallel execution of...
The consensus mechanism leverages both the Proof-of-Stake (PoS) and Proof-of-Quorum (PoQ) algorithms - enabling it to scale linearly with high...
